|
 |
Please confirm you have the ownership to disassemble the products and all information. We will not shoulder any responsibility in damage caused by disassembling the products.
This file only offers simple and easy TOUCH SCREEN to install method and precautions.The products are different there may be different installation methods.
Welcome your letter to inquire in various kinds of problems taking place of the installation.
We will not notify owners regarding any future amendments or functional changes of this product. Such revisions will only be updated in the latest edition of our manual and driver software. |
 Touch Screen and Installation Note |
In order to prevent accidental use and performance deterioration, you are requested to keep the following precautions and inhibited points.
- Don't handle the transparent touch panel by holding the flexible pattern portion in order to assure the reliability.
- Don't put one product on the other; it may otherwise cause the product to be scratched.
- Please provide a clearance of 0.3mm at least between touch panel and display cover bezel. The bezel which contacts with PET film should keep a distance at least 0.3 mm from the active area to avoid short.
- The bezel which contacts with PET film should not place heavy pressure on the film and surface of bezel should be kept smooth.
- Please keep clean on the surface of PET film, don't attach any tape on it.
- Neither pull tail upward nor downward with an angle of 90 degrees, it should be keep an arch at least R5.Extremely crooked will cause the broken.
- If there is any high voltage power, please make an adequate protect.
- To avoid the high voltage static power to damage panel, please don't operate touch panel without connecting controller.
- For touch panel, the area outside of the active area shall not be operated absolutely.
- Wipe off the stain of the transparent touch panel by using soft cloth moistened with ethanol. Take care not to allow ethanol to soak into the joint of upper film and better it may otherwise cause peeling or defective operation. Do not use alkaline detergent like glass cleaner, remover (toluene), benzene or other organic solvents.
- Don't operate touch panel with a thing other than a polydactyl pen (tip R0.8 or less) or the finger such as hard or sharp edges like a ball point pen, sharp pencil, etc.
- The transparent touch panel is provided with an air groove, therefore please design surrounding structure not to store any liquid nor any fine particles.
- We manufacture retain the right of changing the materials with same grade and specification.
|
| Resistive Touch Screen Install Note |
- The hardness of the touch screen is about 3H (the hardness of nail is about 2H). Do not use hard material (for example, glass or iron) to brush the surface of the screen which may lead to the damage of the product.
- Do not wrap the tail of the touch screen. Using the bonded mat to completely fix the line and controller behind the monitor. Serious shaking may cause the tail fall off that may lead to the malfunction of the product.
- In order to have the best clicking function of the touch screen, the resolution of 800*600 is recommended.
- After using for a period, the position is not exact. Please Re-run the driver of Correction function.
- The surface prevents oil, water, and dirt. Even the dirt on the surface will not affect the function of product, it will influence the image. The cleaning method is using volatile neutral substance (such as alcohol) to clean the surface. Do not use the acid or alkalescent liquid (e.g. cleaning and soap water etc.) to clean the surface which may lead to the damage of the touch screen.
- After installing the driver, if the cursor is vibrated or uncontrolled, please removes the driver first, and checks whether any other drivers exist (such as mouse or Handwriting board) have been installed. If so, please remove it and install the driver again.
- Touch screen is pressure sensing. Do not touch more than 2 positions. This touch screen can only recognize one position.
- Please touch the screen with the attached Touch Pen. Do not use other sharp material, such as pen or pencil.
|
|
|
